Drive Plate | DP-200

Commonly used on Perkins, Westerbeke, Kubota, Faryman & Universal Engines with Hurth HBW 50/10 & ZF 5/6/10 Transmission

Please reference DP-200 when you call or email us.

Prices are made available by email or phone.

or call us at 1-804-642-9296 for more information.

The following list will help you in gathering the necessary information to identify your replacement drive/damper plate between your engine and transmission.

Engine & transmission make/model
Dimensions of current plate
Number of splines on transmission shaft
Bolt holes & measurements

Measurements for this drive plate can be found below.

Measurements shown below are accurate to the best of our ability.
If you find any need to verify or have questions please email or call our office.

A - 6.18"
(Outside Diameter)

B - 5.60"
(Pitch Circle Diameter of Bolt Holes)

C - 0.59"
(Thickness of Plate)

D - 1.18"
(Depth of Shaft Center)

E - 1.125"
(Shaft Diameter)

F - 10
(Number of Splines)

G - 5
(Number of Bolt Holes)

H - 6
(Number of Springs)

Back to All Drive Plates

DP-200 Drive/Damper Plate

Drive Plate | DP-200

Commonly used on Perkins, Westerbeke, Kubota, Faryman & Universal Engines with Hurth HBW 50/10 & ZF 5/6/10 Transmission

DP-200
Drive/Damper Plate