Northern Lights M864W3G 25 kW Marine Diesel Generator | Northern Lights Gem Series Diesel Gensets | Northern Lights Generators

Tel: 804-642-9296
FAX: 804-642-0340
Email: tadinc@earthlink.net

You are here: Home > Marine Generators > Northern Lights > M864W3G

Northern Lights M864W3G
Marine Diesel Generator

Northern Lights M864W3G Marine Diesel Generator

HZ: 60
KW: 25
RPM: 1800
Cylinders: 4
Bore: 3.40 in
Stroke: 4.20 in

HP: 39
Aspiration: Natural
Length: 46.7 in.
Width: 21.6 in.
Height: 26.7 in.
Dry Weight: 968 lbs.


Features & Benefits

Engine Block: Four cycle, 4 cylinder, liquid cooled, naturally aspirated, overhead valve diesel with glow plugs for quick starting. The forged carbon-steel crankshaft is stronger than cast iron whole the cross flow head makes for more efficient breathing. Helical cut gear train reduces noise.

Cooling System: Standard heat exchanger cooling with optional keel cooling. Copper-nickel, tube-type heat exchanger has removable end caps for easy cleaning. Electrolysis protection via zinc anode. The bronze and stainless steel seawater pump with rubber impeller is gear driven, eliminating a potential failure point.

Fuel System: The self-venting fuel system features an inline injection pump with 3-5% mechanical governor for close AC frequency control. The fuel lift pump is mechanical with a hand primer, eliminating electronic pump failures.

Intake and Exhaust: The M864W3 meets US EPA Tier III emission standards. Its cast aluminum intake manifold with Sound Maze system reduces noise, and its washable air cleaner makes routine maintenance simple. The wet exhaust elbow is stainless steel.

Lubrication System: The closed crankcase vent system traps oil vapor and keeps engine room clean. 6.9 qt (6.5 ltr) oil capacity for better lubrication and 200 hour oil change intervals. Oil drain hose with valve plumbed to base pan as standard.

DC Electrical System: The DC System features a 12 volt starter motor and battery charging alternator with belt guard. The set is equipped with a standard remote mount control panel, featuring an hour meter, stop-start switch, engine gauges, a preheat switch, and includes a 20 foot (6m) harness. The standard panel can be expanded to six panels, up to 110 feet from the set. Gauges include oil pressure, coolant temperture and DC Voltage. Low oil pressure, high coolant temperature and high exhaust temperature safety shutdowns standard.

AC Generator: The Northern Lights, direct coupled, four pole, twelve lead reconnectable generator has Class “H” insulation, a pre-lubricated bearing and features a conservative heat rise rating of 95°C/50°C ambient. Our automatic voltage regulator gives you ±1% voltage regulation. The AVR protected by a dedicated circuit breaker.

Installation Data:

Wet Exhaust Elbow: 3 inch (76 mm) OD

Raw Water Inlet: 3/4 in (19 mm) OD

Fuel Inlet: 5/16 - 37T JIC

Fuel Return: 1/4 - 37T JIC


Request Purchasing Info

Prices are made available by email or phone.

Request Purchasing Info

or call us at 1-804-642-9296 for more information.

Back to Northern Lights Generators

Northern Lights Accessories

Northern Lights Generator Accessories

Sound Enclosures, PTO's, Water Lift Mufflers, High Output Alternators, Gas/Water Separators and More...

View Accessories